DWARVIN Integrated Railroad Crossing Kit with Power Supply N Scale

N Scale 

The Dwarvin N Scale crossing system provides all needed to integrate 2 Railroad Crossings together with 2 side-on Detectors, and 1 crossing bell all controlled by the Lamplighter DFL unit.  

The Detectors are pulsed infrared they are insensitive to ambient lighting. They will remain on until the object is not visible. The DFL unit in turn turns off 5 seconds after all detectors return to their waiting state.

There is absolutely no programming and or soldering required. The 3 wires from the detectors and crossing bell are attached to the control unit using screws built into the control unit.

The fibers are inserted into two "chimneys". Each can hold either a 1.0mm fiber for the HO RR Crossings or 0.75mm fiber for the N RR Crossings, or 1.5mm fibers for O RR Crossings.

Power supply of 9V arrives with the unit. You may also utilize your DC bus wire from your layout which must be 7V with center positive wiring into the power jack connector provided in the kit to complete the power install.

If you have a double track on your layout, order another 2 detectors is all that you need to complete the install.

Note:

 Availability Special Order !