ITT GRADE CROSSING CONNECTIONS STEP 6

THE SENSOR SHOULD BE PROPERLY WIRED AT ABOUT 4 FT WHICH IS MAXIMUM OR DISTANCE THAT SUITS YOU NOT TO EXCEED THE MAXIMUM

SOLID WIRE OF 22-24 GAUGE SHOULD BE USED FOR A BETTER CONNECTION. YOU CAN ALSO USE STRANDED BUT YOU MUST TWIST THE ENDS FIRST

A BARRIER STRIP IS HIGHLY RECOMMENDED BUT NOT REQUIRED. THE STRIP ENSURE A NEAT CONNECTION OF ALL WIRES AND ALLOWS FOR LESS WIRING TO THE GCS/IR-1

BARRIER STRIPS CAN BE PURCHASED AT YOUR LOCAL ELECTRONIC STORE OR HARDWARE STORE ( In the electrical section )