Badger Stynylrez Primer Application Instructions

STYNYLREZ Application instruction:

No thinning necessary.

Shake well before using.

Best applied with a .5mm or larger nozzle airbrush at 20-30 psi (1.5-2 bar).

Pour the desired amount of STYNYLREZ primer into the airbrush color reservoir.

If using a bottom feed airbrush, attach jar containing STYNYLREZ to the airbrush. Holding the airbrush 4”-6” (10-15cm) from the item you are priming, apply STYNYLREZ in even coats over the entire surface of the item.

Apply in light coats, building the primer up until the entire surface of the item is covered and the items actual color is hidden.

Check all areas and shoot any light areas or any areas where the items actual color is still detectible.

Let dry 5 to 8 minutes (3 minutes if dried with an artificial heat source).

Your item is now primed and ready for painting. Allow 24 hours for full cure.

Clean your airbrush by immediately spraying MODELflex airbrush cleaner through it or your preferred Airbrush cleaner.