2 Pack Grey
Primer
Pack Contents :
- 1 x 100ml Primer (High Build) also
known as Urethane or Polyurethane ()
- 1 x 30ml Hardener ()
- 1 x 60ml Thinners ()
- Instructions
Mixing Ratio
4 Parts Primer + 1 Part Hardener + 10-30% Thinners,
e.g. 40ml Clear, 10ml Hardener + 15ml Thinners
ONLY MIX WHAT
YOU NEED EACH TIME, once it's mixed it has a life of about 15/20 mins max
then it has to be discarded.
Is it possible to
pre-mix your 2 pack Primer then keep it in a jar for later use if not all
used in one go, or is it a case of just mixing enough to do the job?
NO YOU MUST NOT
DO THIS, once you mix the primer and hardener a chemical reaction is
started, similar to epoxy glue or epoxy putty. It will hardened within
15/20 mins, if you mixed the lot you would be wasting product and money, so
only mix whet you need each time, you will quickly find the amounts you need
with a small amount of practice.
All Zero Paints dry matt
and require clearcoating unless otherwise specified
Application Notes :
Zero Paints are pre-thinned for Airbrush use. Shake container
until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C
Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins.
For additional thinning use Basecoat
Thinners.
Which
Airbrush Cleaner should I use ?
You can use either use Zero
Paints Airbrush Cleaner or Basecoat
Thinners, alternatively any thinners that contain Toluene
should work, but it's best to test first. DO
NOT use White Spirt or Acrylic Thinners, they are not suitable. |