EVAN DESIGNS EXTREMELY SMALL LED

These super small LEDs are known as surface mount LEDs or Chip LEDs.

They are tiny but bright LEDs and are some of the very smallest Chip LEDs available that still give a great amount of light.

We have taken these SMD Chip LEDs and added 8 inches of red and green superfine magnet wire.

Get these chips already soldered, tested, and ready to connect to your power supply.

Choose your power supply, we have LEDs set up for 3 volt DC, 9 volt DC, and 7-19 volt AC/DC

Chip Dimensions: 3.3mm x 1.6mm

Thickness 0.8mm with wires attached 1.3mm

For 3 volt use you require 3 volt coin holder or 3 volt AAA Batt holder ( Sold Separately )

For 9 Volt Battery or Regulated Adapter you require 9 Volt Battery Snap/Switch

For 12 Volt you require a 12 Volt Regulated Adapter

For your own AC or DC power up to a rated 19 Volts you require 7-19 Volt Universal AC/DC lights which are already set up to use on your own power supply

How many can run at once?

Using a 3 volt coin holder you can run 1-10 chips.

Using a 3 volt AAA holder you can run 1-30 chips

Using a 9 volt battery snap/switch you can run 1-50 of the chips.

Using a 12 volt 1 Amp supply is also 50 chips, but for much longer!

Using your own power?

The chips draw 20milliamps each. So check your power supply to see how many milliamps it is capable of. A 1000 milliamp supply can run 50 chips.

Can the chip LEDs be run along with other LEDs from the same battery or coin cell?

Yes the chips can be run right alongside the other sizes of LEDs on the same power supply.